1. Which cleaning solution should I use?
A number of detergents, wetting agents and other such components are used in the making of a modern Ultrasonic cleaning solution. And there is a variety of formulations available from which you can take your pick depending on the application. Selecting a proper solution is very important for a satisfactory cleaning job and to stop unwanted reactivity with the part being cleaned.
2. Which cleaning solution shouldn’t I use?
Flammables or solutions that have very low flash points should never be used. Cavitation releases energy which is then turned into heat and kinetic energy. As a result of that, high-temperature gradients in the solutions are produced. This can be very hazardous for the part being cleaned. Acids, bleach and bleach by-products should generally be avoided. but maybe used with indirect cleaning in a proper indirect cleaning container, such as a glass beaker, and appropriate care. A strong acid or alkaline cleaning solution will damage stainless steel tanks, to overcome this problem, pls use a mild PH solution.
3. How Long Should an Ultrasonic Cleaning Cycle Be?
There is no set amount of time or “typical” cleaning cycle. How dirt the part is, the temperature of the tank, how clean the part is to be, and the condition of the Ultrasonic cleaning solution all contribute to the length of the cleaning cycle.
Generally, for 2-27L machine suggest the machine not continuously running for 30 minutes, please stop at least 20 minutes before a new running cycle. If you need a long time continuously running, an industrial series Ultrasonic cleaner can be approved.
4. Can we print our own brand?
A: Yes, Of course.Will be our pleasure to be one of your good OEM manufacturer in China to meet your OEM requirements.
5. When should the Ultrasonic solutions be changed?
The solution should be changed when the solution is very dirty or depleted or when you notice a decrease in cleaning action. However, you must remember that every cleaning session does not require a new batch of solution.
6. What is direct and indirect cleaning?
Direct cleaning occurs when the parts are cleaned in the cleaning solution which fills the cleaner. Usual the parts inside the mesh cleaning basket.
The indirect Ultrasonic cleaning is used when the parts to be cleaned are placed in a remove tank or beakers that contains cleaning chemical that could damage the Ultrasonic cleaner.
